Connection Cable & Power Supply

Lenght: 2 m, 5 m, 10 m, 15 m and 20 m

Connector: M8x1, 4pin female connector, straight

Length: 2 m, 5 m and 10 m

Connector: M8x1, 4-pin female connector, tilted

Lenght:2 m, 5 m, 10 m and 15 m

Connector: M12x1, 5-pin female connector (4-pin wire), straight

Lenght:2 m and 5 m

Connector: M12x1, 5-pin female connector (4-pin wire), tilted

Lenght: 5 m

Connector: M12x1, 8-pin female connector, straight

Flash cable for controlling lighting and camera via a cable connection. Supply of camera and lighting with one power source (power source not included).

Variants:

• M8x1, 4-Pin (Light). 6-Pin (Camera) REF 03624.xx
• M12x1, 4-Pin (Light), 6-Pin (Camera), REF 04090.xx

External plug-in power supply with 230VAC / 50Hz input for steady light operation of MBJ lights with integrated -s controller.

Available in the following versions:

• max. 2.5 A with M8/4pin or M12/5pin connection
• max 5 A with M12/5pin connection

Alternatively available with open cable ends for connecting lights with cable controller

External plug-in power supply with 230VAC / 50Hz input for continuous lighting operation of MBJ lights with integrated -s controller.

This power supply unit also has a cable-integrated on/off switch, ideal for mobile use of the lighting.

Available in the following versions:

• max. 2.5 A with M12/5pin connection

External plug-in power supply for connecting the MBJ CTR series

• input voltage:    230 VAC /  50 Hz
• output voltage: 24 VDC / 5 A

Quick and easy set-up of CTR-50/51

The adapter cable makes it easier to set up the CTR-50 and CTR-51 controller series via RS-232.
Simply connect the three open cable ends to the RS-232 port of the controller. The USB-to-RS232 converter is then plugged into the USB port of the computer - the controller can now be adapted to your requirements using serial communication software (e.g. HTerm).

•     USB 2.0 Type-A plug
•     Serial RS-232 with open cable ends (3 pin)
•     1m length

Connection note: